Microprocessors and sensor input are widely used in control systems to control and monitor physical processes.
- Microprocessors: Microprocessors are the central processing units of control systems. They are used to process input data from sensors and execute control algorithms to control the output of the system.
- Sensor input: Sensors are used to monitor physical variables in the system, such as temperature, pressure, and position. The data obtained from the sensors is processed by the microprocessor to make control decisions.
Examples of control systems that use microprocessors and sensor input include:
- Automated manufacturing systems
- Home automation systems
- Automotive systems
- HVAC systems
- Medical devices
In these systems, the microprocessor and sensor input work together to provide real-time monitoring and control, allowing for improved performance, efficiency, and reliability.
The digital integrated circuit (IC) called a microprocessor has ushered in a whole new era for control systems electronics This revolution has occurred because the microprocessor brings the flexibility of program control and the computational power of a computer to bear on any problem. Automatic control applications are particularly well suited to take a of this technology and microprocessor-based control systems are rapidly replacing many older control systems based on analog circuits or electromechanical relays
A microprocessor is a computer processor where the data processing logic and control is included on a single integrated circuit, or a small number of integrated circuits. The microprocessor contains the arithmetic, logic, and control circuitry required to perform the functions of a computer's central processing unit. The integrated circuit is capable of interpreting and executing program instructions and performing arithmetic operations. The microprocessor is a multipurpose, clock-driven, register-based, digital integrated circuit that accepts binary data as input, processes it according to instructions stored in its memory, and provides results (also in binary form) as output. 
Having a microprocessor in a control system has several advantages:
- They can process data very quickly and much faster than a human could
- Due to these fast speeds they can react very quickly to change in the control system
- Control systems can run through out the year 24/7
- They can work in places where it would be dangerous for a human to
- Outputs are consistent and error free
- Low level signals from sensors, once converted to digital, can be transmitted long distances virtually error-free.
- A microprocessor can easily handle complex calculations and control strategies
- Long-term memory is available to keep track of parameters in slow-moving systems
- Changing the control strategy is easy by loading in a new program; no hardware changes are required
- Changing control strategy is easy by loading in a new program; no hardware changes are required.
- Microprocessor controllers are more easily connected to the computer network within an organization. This allows designers to enter program changes and read current system status from their desk terminals
However there are several disadvantages
- It may cost a lot of money to develop the software for a control system as they are specialized
- The system will not be able to run in the case of a power shortage
- The system will not be able to run in the case of a computer malfunction
- A computer can't react to events that it has not been programmed for, unlike a human could
- It can cause some concern if total control for a system and the decisions are handed over to a computer
The following are some sensors with explanation and example uses:
- Heat: measures temperature, e.g. central heating, fire alarm
- Humidity: measures water vapour in the air, e.g. greenhouses, swimming pool halls
- Infra-red: measures radiation, e.g. security alarm systems
- Light: brightness, e.g. security lights
- pH: acidity levels, e.g. environmental monitoring
- Pressure: force applied on the sensor, e.g. automatic doors, alarm systems
- Smoke: particles in the air, e.g. fire alarm
- Sound: sound pressure level, e.g. noise pollution monitoring, voice controlled systems, alarm systems
- Tilt: angle of tilt, e.g. aircrafts, alarm systems installed in windows
- Touch: more sensitive than pressure/detects contact, e.g. robots
Actuators give a system an output form. A few examples include:
- LED/light bulb: creates light, e.g. display of information
- Heater: increases temperature, e.g. central heating
- Cooling unit: decreases temperature, e.g. central heating, AC
- Motor: spins things around, e.g. robots, washing machines, elevator
- Pump: pushes air/water through pipes, e.g water cleaning system, process control
- Buzzer/bell/siren: creates (loud) noises, e.g. fire alarm
Control systems can be open loop or closed loop.
Open loop systems will just consider the input and then keep repeating the same task given the input, e.g. a microwave heats for a given time period without actually checking the temperature of the food.
Closed loop systems on the other hand will also take into account other factors, including the output itself. For example a water tank control system that keeps water levels constant will constantly adjust its output (opening or closing a valve) depending on the input it gets from water level sensors.
- Outline the uses of microprocessors and sensor input in control systems.